Madam/sir,In the assignment you have given I have solved it in two ways one is with manual reset and second one is with automatic reset. After thinking for long I developed that program. Please check that also.https://drive.google.com/file/d/1rEcqj1ZtoKvty0ESMOl5uMseN8kRGkpy/view?usp=sharinghttps://drive.google.com/file/d/1WPJtREMOB2xu1QzTCQgNWcCTVv0-_uZZ/view?usp=sharingThe above two are complied and saved file of first program.The following two are the second program's compiled and saved files:-https://drive.google.com/file/d/1PMKpRjvtuzLFw2gaSuDGP7zHvPu-t6JB/view?usp=sharinghttps://drive.google.com/file/d/1BWstrk03Mt1F83bwKujwDqyIW5qf48cE/view?usp=sharingPlease reply me for the answer, for both the types .
401 visits
Outline:Connection of SMPS and USBasp to the Mainboard 3 types of counters - Count up, Count down, and Count circular About working of CTU counter Insert a Contact and a Coil To the right of Contact, insert CTU and set the count value as 3 Real-time simulation of CTU Working of CTU in simulation mode Make hardware connections for the CTU using Traffic light module and Switchboard module Demonstration of CTU on hardware Resetting CTU using RESET instruction
Connection of SMPS and USBasp to the Mainboard 3 types of counters - Count up, Count down, and Count circular About working of CTU counter Insert a Contact and a Coil To the right of Contact, insert CTU and set the count value as 3 Real-time simulation of CTU Working of CTU in simulation mode Make hardware connections for the CTU using Traffic light module and Switchboard module Demonstration of CTU on hardware Resetting CTU using RESET instruction
Show video info
Pre-requisite